Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
multi tech config
”
RELATED FAQS
Question
Answer
What is the read range of the new Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
What is the read range of the Schlage MT11 wall mounted reader?
Resolution:
All read ranges are affected by the environment the reader and card are subjected too. The following data was obtained in a relatively "noisy" RF area with the reader mounted on a metal ...:
What credential types are compatible with BE467?
Resolution:
The BE467/FE410 does not support prox-only credentials.:
MiFare
Resolution:
Type of smart card format whose serial number and secured sector are readable by AD Series prox and multi-tech readers.:
What is the SUS feature "Device Template"
Resolution:
See the attached Technical Note for instructions on saving a "Device Template" FROM a device or loading TO a device, Device Template Tech NoteOn the SUS/HHD go to the LOCK Properties tab, and sele...:
What current should an AD-Series or CO-Series lockset draw while in its low power "Sleep" mode?
Resolution:
Use a multi-meter in series with the batteries to measure battery current. Be sure your multi-meter can accurately measure very low current, in the micro-amp range. See the attached Technical Not...: