Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
mortise lock spring
”
RELATED FAQS
Question
Answer
How do I change the handing on my 7500 mortise lock?
Resolution:
You can reference the 7500 mortise lock rehanding instructions. Remove the two screws from mortise lock faceplate. Remove the face plate and the collar from the mortise lock then rotate the la...:
What are the part numbers for the end case and latch case springs for the 88 rim?
Resolution:
The part number for 88 rim end case spring is 090003-00 (PKG of 2) or 090080-00 (PKG of 10) and latch tail spring is 050393-00 (PKG of 10).:
Can a Von Duprin 7500 lock and device replace a Schlage L9000 series lockset?
Resolution:
While they are both mortise locks they are not interchangeable. You would NOT be able to use a L9000 with a VD panic device. You would NOT be able to use a VD 7500 with Schlage lev...:
What parts are needed when converting the 8875L to L-NL?
Resolution:
To convert the 373L to NL function, it requires NL cylinder plate, 050599 which would have been shipped with the 373L trim.:
Why does my 7500 retract the latch bolt but not re-lock the trim?
Resolution:
Tips for changing the function: The NL Drive screw will not be visible when lock body is set to Classroom function There is locktite on the screw that makes it seem like its turned down enou...:
Will the Von Duprin 7500 mortise lock replace an old 34 or 58 lock body?
Resolution:
The Von Duprin 7500 mortise lock body will replace the old style 34 and 58 lock bodies. Order a 7500 mortise lock in the proper finish. The old style strike must be replaced with 575 strike becau...: