Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise lock remove lever handle ”

RELATED FAQS

Resolution: To remove the M lock trim follow the steps below in reverse. The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...:

What other locks can the blue lever removal tool 24002693 be used with?

Resolution: On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:

Why can't I remove the control key from the core after the core is inserted into the lever?

Resolution: The lever may be missing the slot feature for the core locking lug. Verify slot is in place.:

Can you order the Schlage L series mortise lock with knob on one side and lever on the other?

Resolution: Includes the SL1 lever on one side and the SK1 knob trim on the other side.:

What is the ME9453?

Resolution: At one time we offered a 9453 function in several different lever, knob and grip handleset designs. A wide variety of trim offerings were available. The mortise lockcase was a smaller version of th...:

Is the 375L the only trim that will lock with a lever for the 5575?

Resolution: The 375L is the only lever trim with 5575 mortise device that locks or unlocks the outside handle.:

Why does my AD or CO series lock unlock when the lever is raised?

Resolution: Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted. This will occur if the outside spindle (square post) is install...:

Does Schlage make a mortise lock that the lever on either side retracts the latch and a key on either side retracts the deadbolt?

Resolution: The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...:

What is the part number for the inside lever on an L9000 lock?

Resolution: The part number is the 09-402, specify the design and finish.:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...: