Monarch electic panic

RELATED FAQS

Question
Answer
Electric Latch Retraction(ELR) option for the 19 Series was discontinued in December of 2006.
The resistance readings for a Falcon 24 or 25 Series EL solenoid should read;Green to Yellow = Pull Coil, should measure between 1 and 2 ohms of resistance. Green to Orange = Hold Coil, s...
Von Duprin 6300 electric strike will operate with 88 rim but not 88F fire rated exit devices.
The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device.
Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements. Panic Hardware is an exit device which is tested for u...
The most obvious difference (in the device) is the lack of mechanical dogging on a Fire Rated Device.  There are some internal parts that may be different and the method it is secured to the d...
Yes, "Standard" was the old name for the sectional pull trim for the 18/XX devices and is now called Athena.  The trim is the same, only a name change.
The Monarch KIL trim uses the following cylinders: Schlage Cylinders 23-013 Conventional 20-750 Primus 20-750-XP Primus XP 20-550 Primus UL437 20-550-XP Primus UL437 XP Falcon Cylinder A23165-0...
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
The Falcon Monarch 18-R-EO device can be converted in the field to the 18-R-L by purchasing three parts. The following items are required to convert the device.  812L or 816L lever tri...