manually enter credentials HID PROX

RELATED FAQS

Question
Answer
When trying to program a CM lock, it may display an error code with a solid green light and 10 read flashes. This indicates the lock has already been programmed with computer software and manual pr...
There are two new credentials available which allows a facility currently using iButtons credentials to transition to proximity credentials. Since the new AD and CO series units no longer supp...
The BE467/FE410 supports the following credential types:Smart credentialsMIFARE Classic 2.5Kbit, 8Kbit, 32KbitMIFARE DESFire EV1 16Kbit, 32Kbit, 64KbitMulti-tech125KHz prox/MIFARE Classic 8Kbit, 32...
The BE467/FE410 does not support prox-only credentials.
Out of the Box, or after a Factory Default Reset, all AD locks can be used in a "Construction Mode".    At launch ...   The AD-Series locks would accept the first card credentia...
Update your device firmware to the latest version to fix this early design / feature update
The process to change the Credential Reader on an AD-Series lock is as follows: Note: To ensure firmware compatibility of the lock and reader, it is important that the firmware in the LOCK and the...
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature. &nbs...