Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LX WITH CHEXIT ”

Resolution: The LX switch is not available with Von Duprin rim and vertical rod Chexit devices. If using a mortise Chexit device the SS7500 mortise lock would provide a LX latch bolt monito...:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Can the Chexit 98/99 be used with the E996 lever trim?

Resolution: You can use the E996L electric trim with Chexit 98/99 series exit device.:

Is the the PS914 EL wiring adapter needed for Von Duprin Chexit device?

Resolution: The EL Wiring Adapter is not needed for a CX device.:

Do you have a micro-switch with orange wires?

Resolution: The micro-switch with two orange wires is probably the Chexit switch assembly for devices shipped prior to 8-24-2015 with solenoid driven, part number 13-065-00. :

Why is my Von Duprin CX going into a weak alarm after the rearm delay?

Resolution: Chexit devices shipped prior to 8-24-2015 with solenoid - the solenoid pulls and drops, the alarm sounds, there is a solid LED or no LED light after the rearm t...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LX WITH CHEXIT ”

RELATED FAQS