Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
lcn packing nuts
”
RELATED FAQS
Question
Answer
PACKING NUT
Resolution:
Threaded part that holds the pinion in place:
What is the part number for the 1460 cylinder mounting bracket?
Resolution:
The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack. Please note it used to be shipped loos...:
Where is the date of manufacture on a 4041 closer?
Resolution:
The date stamp on a 4041/4040XP is on the packing nut. The date will be the week of the year and then the year. EXAMPLE: 10 05 would be week 10 of 2005. For example...:
How do you identify the model number and date code of an LCN cast iron hydraulic closer?
Resolution:
The date is a 4 digit #. The first 2 numbers indicate the week it was made, and the last 2 numbers indicate what year it was made. On most surface mounted closers, the model #, date code, ...:
What LCN closers are available in a tri-pack mounting?
Resolution:
The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.:
What are the SRT screws lengths used with LCN Closers?
Resolution:
SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified. There are 3 standard lengths of SRT screws: 1-3/8" 1...:
In what direction should the hold open nut be pointing for a 4041 H closer, up or down?
Resolution:
Make sure that the hold open nut is not on upside down. The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...: