Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ L series mortise cylinder size ”

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

Is the L-Series mortise lock UL rated?

Resolution: UL Listed for 3-hour fire door (except L9076 and L9077):

Mortise cylinder with switch.

Resolution: The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face...:

What cylinder length options are available?

Resolution: There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

What are the part numbers for the inside and outside knobs for the L series?

Resolution: Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:

Can you order the Schlage L series mortise lock with knob on one side and lever on the other?

Resolution: Includes the SL1 lever on one side and the SK1 knob trim on the other side.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ L series mortise cylinder size ”

RELATED FAQS