Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ L series doors powder coated ”

RELATED FAQS

Resolution: Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...:

Does Von Duprin offer an exit device for exterior use?

Resolution: Most Panic devices are not designed for exterior applications. As with any mechanical device, exposure to the elements may affect the operation and life of the device and/or finish an...:

When were 313AN & 315AN anodized finishes changed to SP313 (695) and 622 powder coat finishes?

Resolution: Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat). All devices ordered as 315AN ...:

What powder coat best matches US10B for a closer?

Resolution: The closest powder coat finish by LCN is Dark Bronze (BHMA 695).:

What are the LCN standard finishes?

Resolution: White Powder Coat can be ordered as a special RAL finish with a metal cover.:

What doors are available with monorail preps?

Resolution: Monorail cutouts are only available for non fire rated applications.:

What parts are needed to install an L lock on an 1 3/8" door?

Resolution: The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...: