Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ is blocking required for exit devices ”

Resolution: SLM - special laminated material - blocking is put into the wood doors so there is material to mount the exit device using wood screws.:

Are there any instructions for Von Duprin device maintenance?

Resolution: Please see the Maintenance Kit Manual for information on device lubrication as well as complete breakdowns and parts lists for Von Duprin exit devices.Exit devices and latc...:

How many Von Duprin QEL devices can be connected to a power supply?

Resolution: Product Ordered before 7/10/2012 - Product identified by no label on QEL motor. You must use the 900-2Q option board with the PS900 power supplies to operate the QEL devices. The attached ta...:

What are the amperage and power supply requirements for the Von Duprin Chexit (CX) devices?

Resolution: Chexit motor driven devices shipped after 8-24-2015:You can use 1 Chexit device with PS902, 3 Chexit devices with PS904, and 4 Chexit devices with PS914 or PS906 power supplies with proper gau...:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ is blocking required for exit devices ”

RELATED FAQS