Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ installing Schlage utility software on hhd ”

Resolution: - With the CIP NOT inserted and the Schlage Utility Software (SUS) running o Enter the Master Programming PIN or Present Loc...:

Where can I download the latest version for the Schlage Utility Software?

Resolution: Updating the Schlage Utility Software (SUS) on a Hand Held Device (HHD) will cause the SUS "Login Password" AND the current device "Coupling Password" to be reset to factory default settings of - 1...:

The Hand Held Device (HHD) or Schlage Utility Software (SUS) will not connect to the CO200?

Resolution: Make sure the HHD/SUS is set to USB communication by checking the small icon right of the "No Device Connected" message. The symbol should be a USB symbol when working with USB enable product...:

Can the low coin cell Nuisance delay be Disabled on a CO200?

Resolution: The coin cell is ignored when the lock sets are used with Manual Programming ONLY or while in Construction mode.:

Which AD firmware package version supports WRI400/CT5000 devices?

Resolution: SUS 4.4.0 released on 06/06/2011 is the first released SUS version compatible with WRI400 and CT5000 devices.:

Is there a way to clone a failed PIM400 so it could be replaced without having to re-link associated locks?

Resolution: It is currently not possible to clone an AD-Series PIM400.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ installing Schlage utility software on hhd ”

RELATED FAQS