Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ install on right hand ”

RELATED FAQS

Resolution: Go to the push side of the door opening. See above illustration. If door swings out to the left, it needs a left hand door closer. If door swings out to the right, i...:

Is the AD CO with a 993 chassis compatible with the Von Duprin 33A exit device?

Resolution: No, the 33A is not compatible with the AD and CO 993 chassis units. The 33A can only be driven in a clockwise direction. This would restrict it to right hand installs only.:

RIGHT HAND REVERSE BEVEL

Resolution: RHR:

How do I change the hand of a hotel cylinder?

Resolution: HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation. Right hand shown below.:

Can I communicate via RS-232 to a Hand Reader if they have an EN-200 ethernet or MD-500 modem installed?

Resolution: If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu. In order to ...:

What are the steps I need to take in order to do a card emulation test between biometric hand readers?

Resolution: If an access control system is not available to test the card output on a hand reader, this card emulation test can be done to verify the card format is correct. These steps will guide you in...: