Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ HD EL solenoid ”

Resolution: The solenoids are different. The current standard EL solenoid and mounting bracket is a one piece unit. The bracket is crimped into the front of the solenoid. This solenoid and plunger has no mech...:

What could cause the Von Duprin EL solenoid not to hold when mechanism cover plate is slide over the solenoid?

Resolution: If mechanism cover plate causes the EL solenoid to drop when slid over the solenoid, the solenoid plunger requires adjustment. You must lengthen the rod by turning the hex nut in front of the plun...:

How many thread should be showing on the solenoid plunger bushing on EL device to operate correctly?

Resolution: The threaded bushing on the solenoid plunger requires 8-9 threads showing to operate correctly.:

What is the part number for the ND solenoid?

Resolution: The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...:

What is needed to keep the EL device retracted all day?

Resolution: To keep the Von Duprin electric latch retraction EL or QELA exit device dogged (retracted) all day, have your access control, Key pad, key switch, fire alarm contact or any other signals ...:

What Von Duprin solenoid crosses over to the solenoid part number 971687?

Resolution: If you are trying to replace Von Duprin EL solenoid part number 971687, the sellable part number for the solenoid and plunger is 050535. Please note that the solenoid is rarely the cause of E...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ HD EL solenoid ”

RELATED FAQS