Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ full size core ”

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :

Can the AL locks be ordered to accept Corbin Russwin core?

Resolution: The AL lock can not be ordered to accept any competitor full size core. The ND lock should be used in these applications.:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:

What is the part number for a full size interchangeable core control key?

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:

How to order a T series lock with a Corbin Russwin full size interchangeable prep.

Resolution: Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6 This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ full size core ”

RELATED FAQS