Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon SFIC tailpiece for Mortise cylinder ”

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

Is the C987 a small format or full size core?

Resolution: The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

What is the thread on a mortise cylinder?

Resolution: The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32:

What is the standard Falcon cam?

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon SFIC tailpiece for Mortise cylinder ”

RELATED FAQS