Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
FALCON FREIGHT POLICY
”
RELATED FAQS
Question
Answer
FastTrack program information
Resolution:
Allegion Employees can access the distributors’ “My Allegion Portal” thru The Frontline Home Page: Click on “My Allegion Distributor Portal” located in the navigation menu on the left si...:
How do you install the arms on a 9100 Series Benchmark operator?
Resolution:
The installation of the arms with the Benchmark and Falcon Swing Door Operator is similar to the Sr. Swing Series . The arms are installed with the main activation input shorted, the gearbox at the...:
How to order a 25-C device with the NL-OP trim function?
Resolution:
Device would be ordered as a 25C-C as of June 2012.The C-C suffix designates the 25C will come with the 718C-C cylinder control which uses a 1-¼" mortise with a narrow straight cam:
How do I set the hold open on my 4040 closer?
Resolution:
The hold open position on a "REG" or "EDA" hold open arm is set with the door to a few degrees shy of the desired hold open point. To properly set, open the door 5° less then the desired hold open...:
What template to use for the Falcon MA mortise lock?
Resolution:
The following templates are for the MA lock. Use the matrix in each template for the specific function. See here for Sectional trim . See here for Escutcheon trim. :
What is the Falcon restricted keyway process for new end users?
Resolution:
A PO from a distributor with a letter of authorization from the end user.:
What is the part number for the lever return spring for the old M series mortise lock?
Resolution:
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...: