engage user guide adding cte programming

RELATED FAQS

Question
Answer
When trying to program a CM lock, it may display an error code with a solid green light and 10 read flashes. This indicates the lock has already been programmed with computer software and manual pr...
Yes.  The AD-200 and CO-200 each can be managed through manual direct lock keypad programming or PC software programming using an HHD to transfer programming information to the lock....
Early versions (12/09 ) of the AD200 User Guide in many DEMO kits incorrectly state the Programming sequence to change the a programming code. It shows entering the new programming code o...
A biometric F-Series hand reader comes with a standard user memory size depending on the model of the reader.  The customer will need to purchase a memory upgrade to accommodate additional use...
The following technical note describes the process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch with a memory upgrade code. F-Series (F3) memory upgrade
In order to manually program a CM lock, there must be a keypad on the reader. If there is not keypad on the reader, then the CM lock can't be manually programmed. Refer to the Schlage 1000 user pro...