Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL device weather ”

RELATED FAQS

Resolution: Exit devices are not designed for exterior application. If used in an exterior applications then a powder coated finish on the 33/35 and 98/99 series are recommended for exterior applications. ...:

Is a Von Duprin or Falcon EL device available in 12V?

Resolution: Electric latch retraction, EL, devices are only available in 24VDC. (Note: The EL option for 24/25 series and related service parts have been discontinued as of 7/25/2022):

Is Von Duprin's EL device rated for continuous duty?

Resolution: The Von Duprin EL devices are rated for continuous duty.:

Why do you need the potted circuit breaker for the Von Duprin EL device?

Resolution: The potted circuit breaker for the Von Duprin EL device does the switching from the 16 amp pull coil on the solenoid to the .33 amp holding coil of the solenoid.:

Will the MPB-842 or MPB-840 power EL or QEL devices?

Resolution: The old MPB842 power supply will power up to two EL electric panic bars but will not power the QEL devices. A defective potted module inside the electric panic bar or defective power supply coul...:

Does the PS914-2RS x EL device have time delay?

Resolution: The PS914 x 900-2RS option board doesn't have time delay. If time delay is required specify PS914 x 900-4RL. 900-4RL provides up to 75 seconds, 5 second increment unlock time.:

How do I add mechanical dogging to my Von Duprin EL device?

Resolution: HD-EL (Hex Dogging Electric Latch Retraction) solenoid and plunger can be replaced with standard EL solenoid and plunger on non fire rated exit devices, but this should not be used on a daily basi...: