door edge gaurd

RELATED FAQS

Question
Answer
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...
The difference between the Brass version 482B and the Aluminum version 482A is the size and design as well as the base material and available accessories.  The Brass version  482B comes w...
Steelcraft does offer two types of seamless edge construction that support SDI classification standard Model 2 -seamless. Filled Edge: Epoxy fill, two part epoxy filled and dressed smooth. (LF, ...
To determine Actual Door Size, the following values are subtracted from nominal door size (frame opening/order size) Actual Door Size: The largest measured width by height of the door leaf as m...
Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...
The SL-Series door is a square edge non-handed door. A Hinge Filler  (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...
The sliding door edge pull is part number 230.
For hurricane applications, seamless edges are available as an option: H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges. HE-Series doors are a...
SL-Series