discontinued D SERIES LEVER LOCK MANUAL

RELATED FAQS

Question
Answer
The old D series lever lock was replaced by the ND lock in September 2003.
The D lever was discontinued in October 2003 and there are no parts available.
Discontinued in late 2012.   When ADA requirements became required, Schlage created this retrofit lever to fit existing D knobs.  (Orbit, Plymouth, and Tulip knobs only).  See ...
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from&n...
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
The AL-Series has four distinguishable parts that can help in lock identification.     1.   The AL-Series will have a castle nut holding the chassis on the ...