cylinder tailpiece guide

RELATED FAQS

Question
Answer
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders.  Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary d...
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted.    This will occur if the outside spindle (square post) is install...
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.
Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks.  Table 1 below contains part number for T series locks.  Table 1 - Falcon retrofit cylinders  
The B220-001 is an FSIC rim tailpiece and driver.
Standard Schlage rim cylinders will fit a total thickness of door and projecting trim of 3 inches, this includes a minimum of 3/8" of engagement of the tailpiece into the exit device.  See ima...
For total thickness measurements larger than 3 inches see the special cylinder offerings in Pricebook.  Specify the part number and include the total thickness.  We do not offer the ...