Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ corbin mortise lock ”

RELATED FAQS

Question
Answer
Is there a round corner armor front for the L series mortise lock?
The L series armor fronts are only available with square corners.  
How is the L mortise lock less trim one side ordered?
To order less complete trim one side use LLL as the designation for less complete trim outside or inside. This applies to the L9000 & LM9300 Series mortise locks. LESS OUTSIDE TRIM Examp...
What cam to use for a modular cylinder in Sargent mortise lock?
The Sargent cams listed below work for all applications except 16 inside and 50 outside.  The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...
What mortise cylinder cam do I use on a Falcon MA lock?
The Falcon MA-Series requires a different cam for keyed functions than its predecessor the Falcon M-Series.
 
 
How do I install an L9000 mortise lock less outside trim?
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000.  For installation and door prep requirements, see the install sheet.  Add...
What indicator options are available with the Schlage L9000 mortise locks?
In late July, 2014, Schlage began taking orders for a new high visibility indicator for both N escutcheon and sectional trim applications.  A complete listing of lock functions and part number...
The L Series mortise indicator datasheet can be found here. Includes how to order.
Will the Schlage AD trim work with Von Duprin 98 / 9975 Mortise lock devices?
The AD200, 250, 300, and 400 trims will work with the Von Duprin 98/9975 mortise Exit Devices.
What is the part number for a Schlage cam to operate a Corbin lock?
Schlage offers several Corbin Russwin competitor cams.  The left most column  in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...