Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can I get square escutcheon plate ”

RELATED FAQS

Resolution: A reference to the plate that an exterior trim is attached to.:

Why is the L0170 not available in the L escutcheon design?

Resolution: The Schlage L0170 is not available with the L escutcheon design because due to the narrow size you cannot fit the mounting plate underneath. The mounting plate must sit on a "diamon...:

Does the SL-Series door have a square edge?

Resolution: The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:

What is the part number for the plate and the 2030 cylinder?

Resolution: Part numbers listed below: 2030-3071 cylinder assembly includes the closer cylinder and finish plate. 2030-3971 is the cylinder only. 2030-3002 is the finish plate. 2030-3077T is ...:

What does the H-Series housing and linkage look like?

Resolution: The housing and linkage is what sits underneath the inside escutcheon plate and can be seen in this exploded view. The linkage is what gives the H lock simultaneous retraction. It allows the dead...:

Can you use a new 812L on an old bar that had a 182L?

Resolution: The current 812L trim will replace the older 182L trim. Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinde...: