Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
bitting for falcon small format construction key
”
RELATED FAQS
Question
Answer
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
How is a bitting list obtained?
Resolution:
A purchase order must by entered through Order Entry. Part number 50-123 for Schlage and 50-123F for Falcon. Reference the structure number (preferred) or an order num...:
What is the dogging hex key size on the Falcon Monarch devices?
Resolution:
The hex dogging key size for all Falcon-Monarch exit devices is 7/32".:
How to order the mortise full size interchangeable core with a construction core.
Resolution:
This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:
What is the part number for a full size construction control key?
Resolution:
The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:
How do you order the ND series lock with a small format core?
Resolution:
The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core: