Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ auxiliary fire latch spec ”

Resolution: Auxiliary fire latch is tested only from door to door latching by Von Duprin. Some door manufacturers have tested our devices LBR and use additional fire latches to pass the fire test. Contact the ...:

At what degree will the AFL (Auxiliary Fire Latch) bolt release?

Resolution: 1400 degrees which is approximately 20 minutes after the fire starts.:

AUXILIARY FIRE LATCH

Resolution: AFL:

Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?

Resolution: Installation should be 6" from bottom of the door. See attached templates as reference. T-5494 for HM Doors W-5494 for Wood Doors:

What would cause an EL device to pull and release?

Resolution: If your Von Duprin EL (solenoid) device pulls and releases quickly instead of holding the latch retracted, please check all of the items below.In most cases, one or more of these solutions will r...:

Can Steelcraft doors be prepped for the 98/9949 Concealed Vertical Cable Exit Device?

Resolution: Yes, as an option, Steelcraft doors are available with factory prepared for the 98/9949 Concealed Vertical Cable Exit Device.L, B, CE, T and CE-Series doors are available factory preparedDoor prepa...:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ auxiliary fire latch spec ”

RELATED FAQS