at what torque does spindle break on L-mortise lock

RELATED FAQS

Question
Answer
The part number is the 09-402, specify the design and finish.
To convert the Von Duprin 9975NL(Night Latch or Storeroom) to 9975L (Classroom) exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL ...
To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...
To order less complete trim one side use LLL as the designation for less complete trim outside or inside. This applies to the L9000 & LM9300 Series mortise locks. LESS OUTSIDE TRIM Examp...
Yes, the spring torque on 3SP1 butt hinge is adjustable.  See instructions at this link:https://static-or01.inbenta.com/fc7332911aa38d5387ffdef79e8605c6ecdc727ece31acf5bc8e26dcac5d29e4/Iv...
The LV9000 levers will rotate as normal when locked.  Once the lever is rotated to about 45 degrees the lever hits a stop.  At that point if the lever is forcefully rotated past the stop the LV spi...
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.     Spindles and Springs   Part Number  Description  L283-060 Spindle and spring, 1...