are instruction available for removing levers from AL series locks

RELATED FAQS

Question
Answer
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...
The AL and A trim is not compatible with each other.
 See instructions below.
You can not install the S lever onto an AL lock.  The AL and S lever trim is not compatible with each other.
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from&n...
The D lever was discontinued in October 2003 and there are no parts available.
Changing the plunger assembly on the AL-Series requires disassembling the chassis.  Refer to Plunger Assembly Instructions for guidance.