Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
anti-ligature trim for ad lock
”
RELATED FAQS
Question
Answer
What ligature resistant trim is available on the ND or L9000?
Resolution:
High Risk Areas*Patient bedroomIn-suite bathroomIn-suite closetTime-out roomPatient difficult to manage; or risk of solitary and/or unsupervised areas.Medium risk areas*Living roomDining roomGroup ...:
Will the Schlage AD trim work with Von Duprin 98 / 9975 Mortise lock devices?
Resolution:
The AD200, 250, 300, and 400 trims will work with the Von Duprin 98/9975 mortise Exit Devices.:
What is the part number for the twisted tailpiece for AD/CO exit device trim locks?
Resolution:
The part number for the AD or CO twisted tailpiece kit is: 46929303 Tailpiece Kit - (for Exterior Escutcheon -993 into Exit Device, i.e. Von Duprin 98 or 99) Exit Trim 46929303 Includes the...:
Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?
Resolution:
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...:
What parts are needed to install an L lock on an 1 3/8" door?
Resolution:
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...:
What is the break-away point for the Schlage SL1 ligature resistant trim?
Resolution:
The Schlage SL1 ligature resistant lever is designed to break-away between 100 and 200 inch-pounds. The lever will rotate at this point but not allow access.: