Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
AL SERIES MAINTENANCE
”
RELATED FAQS
Question
Answer
How should I clean a biometric hand reader?
Resolution:
The only routine maintenance required on a biometric hand reader is cleaning. The platen surface upon which the hand is placed, the side mirrors, and the overhead window should be cleaned with rea...:
What is the part number for the Von Duprin maintenance kit?
Resolution:
Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...:
Is there a tool to drill the thru bolt holes on cylindrical locks?
Resolution:
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:
What backsets are available on Schlage and Falcon locks?
Resolution:
SCHLAGE locks are available with the following backsets: Lock Series Lock Type  ...:
How do you remove an AL series lever?
Resolution:
See instructions below. :
What is the new option for the old 873-AC board?
Resolution:
When the new PS900 series power supplies were created we did not pursue a version of these option boards. Need to discuss the specific hardware they are using and requirements to determine the app...:
What replaced the A700-009 driver?
Resolution:
The A700-009 driver was obsoleted August 2005 and was replaced with the A700-039 driver and A700-041 finished cap.:
Does Schlage or Falcon offer a backset greater than 5"?
Resolution:
Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...:
Are ND locks available in 629 or 630 finishes?
Resolution:
The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.: