ADA CYLINDER TURN

RELATED FAQS

Question
Answer
Order the 09-900 with the XB11-720 option.
The thumbturn measures 2.085" in length and is ADA compliant.
All functions except L9463 and L463: Add L583-363 to the part number 09-509 L583-363 for the turn only or L9453 07L 626 L583-363 with a lock The L583-363 part number is an option and can not...
The 09-900 mortise cylinder thumbturn has three handing options: right hand, left hand, and non-handed.  Handing of the cylinder is done by a check ball and spring placed in the housing a...
Also applies to the 09-900 XL12-196 mortise cylinder coin turn.
The Schlage mortise cylinder coin turn is part number 09-900 XL12-196.  This cylinder coin turn in non-handed so it can rotate freely in both directions. Can be used with the L9496.  Coin turn wil...
The thumbturn will work but the spindles sit 90 degrees off from each other (Schlage is square, Falcon is diamond).  The result is the throw will end up 10 and 2 o'clock instead of 12 and 3. 
The Schlage B500-Series and B600/700/800-Series have ADA compliant turns.  See our deadbolt literature under downloads.
An anti-ligature lever and knob are available on the Schlage L9000 Series Mortise lock with a special recessed ADA complaint thumbturn and cylinder ring. When ordering, specify the S...