Ives

Question
Answer
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, bl...
All inquiries from a customer (Voice mail, Email, Call) regarding specific product information because of an incident, lawsuit or lawyer involvement please send information to Tracy Jaques, tr...
Ives butt hinge models 3PB1,3CB1, 3SP1, 3CB1HW, 5BB1, 5PB1, 5BBHW are not available with security screws.  HGPART.1005 package of 8 pin-in-socket stainless steel security screws can be ordered...
BHMA provides a certified products directory complete with function codes and meanings from most of the major lock manufacturers.  The most up-to-date directory can be accessed through th...
All Ives Aluminum Geared Hinges excluding the 157XY are tested and approved UL 10C (90 minutes).All Ives Aluminum Geared Hinges excluding the 157XY are certified to ANSI 156.26, Grade 1
The HL6, PL7, PL8 meet ADA guidelines.ADA compliant letter
The Full Mortise Butt Hinges can be use on straight edge or beveled edge doors.On most models, this does not need to be specified as there is nothing different about the hinge when used on a bevele...
A regular butt hinge can accommodate the beveled edge by simply being slightly open when the door is in the shut condition.A Swing Clear hinge needs to be made specifically for a beveled edge ...
Catalog information for Ives Edge Guards is currently being developed.  The order form with part numbers is available. Ives Edge Guard Order FormIves Edge Guard BrochureIves Edge Gua...
The commercial Aged Bronze finish (643e) is the BHMA equivalent to a copper plated, blackened, relieved and then clear coated product. This commercial finish is identical to the residential Aged Br...
Schlage offers both the old style and new style spring and rivet package for the HL6/HL6M/PL7 and PL8.HLPART.10158 - HL6/HL6M/PL7/PL8 Spring and Rivet PKGHLPART.10159 - Old Style Spring and Rivet PKG
Ives hinges have 28 gauge PTFE-jacketed wires.  Other sizes, maybe be available, consult factory. 
Check the Ives price book, the attached files have weights for items not listed.  You can also find an order where 1 product only was ordered and track the shipment to get the w...
All extended warranty requests are handled by Allegion Warranty Service Team.  Email Requests to warranty.service.requests@allegion.com.   
The electrified hinge can be used on QEL exit devices.
Please see  Glynn-Johnson and Ives Care and Maintenance instructionsOnce the link opens there will be an attachment to "click" on.
The HL6EO has a mounting plate on the pull side of the door and a push paddle. The HL6EN has a mounting plate on the push side of the door and a pull paddle.  
If the top of the plate is 16 inches or less above the bottom of the door, the plate is not required to be labeled.  Field installed plates larger than that must be labeled.  The other ...
Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb.          &nbs...
The gap would be 1/8",  similar to typical door and frame.
Contact you local authorized Allegion Distributor for all Allegion brand logo information.
157XY Aluminum Full Surface Continuous Hinge Improvements Ives is announcing a series of updates and improvements that will be taking effect on May 1, 2014 to the 157XY full surface aluminum geare...
HOW TO ORDER1. Specify CON for the Allegion Connector electronic options    Example: EL-99-EO-CON, (99 Series Electrified Latching exit only with Allegion Connect)    Example: L...
The American National Standards Institute (ANSI) and Builders Hardware Manufacturers Association (BHMA) have developed durability, strength and performance standards for every type of door hardware...
840738-00  TWP X 6' Power Cable Kit (contains the Left hand and right hand ribbon cables as well)  
Please contact the Allegion Product Support Team on all questions or inquiries pertaining to hardware finishes warranties. Please send an e-mail to the applicable Product Support team:Closers_TechP...
UL listings can be searched at UL.com under Online Certifications Directory.
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature. &nbs...
In an effort to continue providing the highest quality products and align with market demand Ives is obsoleting the following Aluminum 40 Series Decorative Surface Bolts. Effective immediately Ives...
Governments around the world are focusing on restricting and eliminating the presence of hazardous materials in products and packaging from the environment to improve the sustainability of our plan...
For information on the American Iron and Steel requirements, please contact material.declaration@allegion.com.
Although Schlage recommends using mild soap and water for cleaning the finishes on locks, a list of common hospital cleaning agents and their possible effects on anti-mocrobial finish can be found&...
Assuming there are not obstructions, the door will open 180 degrees when using this hinge. 
As of November 2, 2015, all Ives kickplates will now come standard with beveled 4 edges and countersunk holes with no added charges to the base square inch price of the 8400 Commercial grade kick...
The template for the Ives 955 Rectangular Flush Pull can be found by clicking HERE.  
The wire length for the TW4 electric hinge measures 12"
There is no specific mounting height for the Ives 482 door guard.Customer can check with local code to see if they have a defined height per ADA requirements.If not, customer can pick a height,&nbs...
The 8975 is a flat pull.The profile dimensions are 1.25" wide  (ie. what the customer would see walking up to the pull)  and 0.25" thick.(Note: Allegion support team can access a drawing ...
It is made of brass.
From the centerline of the mounting screws to the nearest edge of the pull is 1 3/4"
No.The TWP Panel Service Kits (840737-28 or -42 for 112HD and 840738-28 or -42 for 224HD) are for replacing an existing damaged TWP Panel.You cannot use this to convert an existing mechanical or TW...
No, these applications are not supported.An automation flush bolt such as FB41T would be the proper choice.  
No.  Ives does not have electrified center hung pivots.
The most common reason is an installation issue.If the screws are not installed straight,  or if  unwanted material gets between the hinge and the frame or door, the result could all...
The residential hinge pin door stops, 69, 70, 72, & 73, cannot be used with commercial butt hinges like the 5BB1 or the 3PB1 (or any of them.)  While the pin diameter on our commercial hin...
Please click here for images of the SB1600 series surface bolts.
The P Mount and Q Mount options in 1/2" thick glass doors use a 1/2" diameter hole for the mounting hardware.
Yes, the spacing is the same.  The holes do not change location.
50 Volts AC/DC  at 3.5A
All Ives geared hinges are certified to meet ANSI 156.26 GRADE 1.
No, the 046HD can not be electrified.
Yes.  Both can be used with an EPT.
From the bottom of the hinge,  up to 13.5".If you have any questions,  please contact Product Support prior to cutting hardware. 
Yes, the 224HD hinge can be used with Paladin doors.Please contact Allegion product support to discuss the details of your application.
The 112HD/112XY hinges are made for and tested on 1-3/4" thick doors only.  For 2" - 2 & 1/4" thick doors we recommend using the 026XY or the 027XY.
Allegion suggests reviewing 7230F and 7237F.Please contact product support for additional assistance.
The FB458 with a 12" rod is a packaged/purchased item, so a 12" rod is not available as a sold separate item.  Ives does offer a sold separate rod package for the FB458 in sizes 18", 24", 36" ...
Individual parts from the "O" mount screw package are not sold separately. 
Per the 2016 edition of NFPA 80, the only restrictions for using spring hinges in a UL Listed fire door application are “at least two shall be provided” per 6.4.3.1.1.2, must be “Grade 1” per 6.4...
For wood doors, wood frames, or composite filled frames the wire access holes must be drilled to a depth of 2-1/2".
Either way, this hinge is making noise and the #1 cause is installation related.  If it is installation related it can often be narrowed down to one of the below. 1. screws not goi...
The extension rods are all threaded, so they can be cut down.The standard 12" rod is not fully threaded and would not be able to be cut. The turning of the bolt is the fine adjustment. Plea...
The Adjusta Studs are used when the frame is not true and plumb. The 705 also has the overlapping metal edges to hide the odd an uneven gaps that make adjustastuds necessary.
Continuous hinges can be cut to custom length at the factory.  Additional charges for this are shown in the price book.  Specify door handing when requesting custom cuts, as cutting some ...
No, they only come in black.  The rubber bumper for the FS410 decorative floor stop is replaceable though engineering specials, but Allegion offers them only in black. 
Yes, the Viewer Extensions (840313 for 698 viewer and 840314 for 696, 700, and 701 viewers) can be used on the Fire Rated versions of these viewers (U698, U696, U700, U701).
Note:  All the hinge pin stops were meant to work with either ¼” or 5/16” diameter hinge pins.However,  the  #70 hinge pin stop was slightly changed (as of 2015 approximately) ...
The following details need to be taken into account if replacing the obsolete HD continuous hinge with the TWP or TW8 option with the new XY hinge with the TWP-CON option.     &n...
There is no tested holding force available for the CL11 or CL12 cabinet latch. These devices are designed to latch a regular cabinet or light weight door ( such as closet or pantry). &nbs...
No, but a piece of aluminum bar stock in the track in front of the spring is  ok.Installer will need to position door where they want it , and then measure the length of block they will n...
The package includes 26 studs.  Note: the hinge leaf that uses the studs only requires 24 studs.
Yes, as an Engineering Special item.For quote request, email to:   VDI_Specials@allegion.com
The Ives power transfer Intermediate pivot (PT 7215) is available in 8-wire or 4-wire with Allegion Connect as an engineering special item.
Ives does not offer longer bolt tips for the Flush Bolts either as standard product or engineering special.
Available documentation can be found at https://us.allegion.com/en/home.html#If you are unable to find the document needed,  please contact support at 877-671-7011.
The larger hinge pin is not available, new spring hinge is needed.  The smaller "spring hinge pin" is available through McMaster Carr.  Use part number 91585A275 (pk/50)  Dimension i...
The 820 has been out of production since 2009, no longer under warrantee.  The replacements are the CL11 and CL12 invisible latches.  
Overall length is 22" with an 18" center to center pull.
No.Use part number FBPART.1014 for the rub plate.  
No,  Ives does not have a bullet proof eye viewer.
Yes, there is a small additional charge shown in the price book under pulls "special pricing information".
The 027XY and the 026XY are the recommended aluminum geared hinges for 2" and 2 1/4" thick door applications. The 112 has only been tested on 1 3/4" thick doors.  The 224 design is definitely ...
The 3SP1 spring hinge is UL fire listed in category GVEV.R1943, Swinging Fire Door Closers.  It can currently be found under the LCN brand in the UL Online Certifications Directory. The spring...
The NRP option will be identified by a small hole with a set screw on the side of the knuckle.The screw will be hidden when the door is closed. If there is no hole with a set screw,  then...
The bolt can be adjusted up to 7/8" by turning the threaded bolt housing into the body.  It can be adjusted so that the bolt is flush with the top of the door when in the retracted state. ...
It is a black Melt Processable Rubber (MPR) product. Characteristics include:RoHS CompliantChemical ResistantEco-Friendly/GreenFast Molding CycleHeat ResistantInformation accurate as of J...
Screws being over tightened one-by-one rather than tightening them all evenly Screws not going in straight will cause torquing and/or stress on the hinge leaves Out-of-plumb doors o...
No, the Ives door knocker screws are not available as service replacement items.  The fasteners are 10-24 x 2.1/2" OSHMS-STL (Finished)
The template/instructions show that the coordinator itself uses 12-24 Machine Screws.The rub plates use #8 x 3/4" Sheet Metal Screws (can be used on metal or wood doors);  only the 4 scre...
The "SH" hinges with security studs use the standard template.  The stud is contained within the hinge and does not protrude.
Per the ANSI/BHMA specification that covers hinges, hinge testing is performed with a 150 lb door.Allegion does not publish test-to-failure data,  as there are no standardized tests for such c...
In order to get both the inside and outside pulls on a single line item, specify with a PR ("pair") prefix, and the appropriate suffix for back-to-back mounting I.E. PR8103EZHD-N.
Yes, it was changed to Ives, now called the Ives CL11 and CL12.  The CL12 still has "BB" stamped into it, and the CL11 has "AA" still stamped into it, carry overs from when they were GJ. ...
It does not.  The Allegion accessories catalog  (click here) shows a representation of N mount.
September 2001
The 299AS-7 and 299AS-8 (strikes with integrated stop) do not have centered strike pockets.  If a true centered strike pocket is needed, order the 299RS-7 or 299RS-8 strike only, as these do h...
https://us.allegion.com/content/dam/allegion-us-2/web-documents-2/Template/Ives_780_Door_Chime_Template_107949.pdfhttps://us.allegion.com/content/dam/allegion-us-2/web-documents-2/InstallInstructio...
Customer needs  to specify door thickness when ordering it.  P can be ordered for thicknesses from 3/8" to 11/16" according to the configurator.  There is an up charge ...
The tab points towards the door on one, away from the door on the other.  M1 has the bend pointing away from the door, can hook it with a foot if on the bottom.  M2, the bend po...
Stainless steel finish kickplates are 10" - 12" stainless in 430 grade.  All others are  301 grade.
The Steelcraft Paladin Series doors and frames are available in compliance with FEMA 361 and ANSI ICC500-2014.  The door system may include other approved Allegion hardware and components that...
APPLICATION Rescue hardware is used on in-swinging bathroom doors in facilities where there is a higher likelihood that someone might fall against the door inside a bathroom, preventing the door f...
54 screws10/32x 5/8" UFPHMS
The door and frame brackets of the 91105F pivots are cast.
No, we will not do a special length beyond the 120/119 length we make.  Doors that large may be too heavy for continuous hinges.  
The document can be found here:https://us.allegion.com/content/dam/allegion-us-2/web-documents-2/InstallInstructions/Ives_S48_Mortise_Bolt_Installation_Instructions_107854.pdf
When ordering an Ives pull, there are 3 possible prefixes to start the description "Blank", PR, or SGL."Blank" or No Prefix is the most common selection and would get a single pull to be mounted on...
As of 2017,  UL has included the following listing for Ives 8400 kick plates.The statement is:  Kick plates and armor plates are to be attached with screws or Acrylic Double-Sided Ta...
Minimum XY hinges have a minimum cut down length of 69” either cut by the factory or by the installer.  (Shorter hinges than 69" may be possible through engineering specials.) HD hinges&nb...
The adjustable studs (or Adjusta Studs) that come with the 705 hinge are usually used when the frame is not true and plumb.  The 705 hinge has overlapping metal edges that cover up the odd and...