Glynn-Johnson

Question
Answer
All extended warranty requests are handled by Allegion Warranty Service Team.  Email Requests to warranty.service.requests@allegion.com.   
Glynn-Johnson (the "Company") warrants only to Customer that the products will be free from defects in material and workmanship for a period of 12 months from the date of shipment of the products.C...
Job Specific Warranty - If job specific warranty letters or certificates are required, please refer to the Allegion Contact Us web page and request the applicable information.NOTES:F...
Contact you local authorized Allegion Distributor for all Allegion brand logo information.
The backset will be 2 3/4", see installation instructions.
Using Soss hinges with closers can require special device and preparation locations. If you have questions on specific closer applications, please e-mail your request (including a description ...
See product information here.
UL listings can be searched at UL.com under Online Certifications Directory.
Integrating an overhead stop with a door closer usually requires that both pieces of hardware be mounted near the same locations on the door and frame usually causing a conflict. In most cases, mod...
The programming processes for Allegion devices can be both product and features specific.  Some products programming processes are electronic in nature, others are physical in nature. &nbs...
Governments around the world are focusing on restricting and eliminating the presence of hazardous materials in products and packaging from the environment to improve the sustainability of our plan...
For information on the American Iron and Steel requirements, please contact material.declaration@allegion.com.
Although Schlage recommends using mild soap and water for cleaning the finishes on locks, a list of common hospital cleaning agents and their possible effects on anti-mocrobial finish can be found&...
The 410 replaced the 324 but is NOT a direct replacement.  
Sensaguard is hold open only.   If a closer is needed, the closer should be installed on the opposite side of the door from the Sensaguard.
Yes, it is possible to convert the Glynn-Johnson Overhead units from Stop to Holder function, or from Holder to Stop function.  Note that fire-rated doors may not be held open with overhead ho...
No, the case is riveted together.  If the rivets are removed, the Sensaguard will be non-functional because the possibility of springs and other components could be lost or misplaced, voiding ...
Yes,  the 100 Series Concealed Overhead Door Holder/Stop can be used on double acting doors.  The installation instructions provide further details.
The extension rods are all threaded, so they can be cut down.The standard 12" rod is not fully threaded and would not be able to be cut. The turning of the bolt is the fine adjustment. Plea...
No, but a piece of aluminum bar stock in the track in front of the spring is  ok.Installer will need to position door where they want it , and then measure the length of block they will n...
The screw pack contains 12 screws to account for both wood and metal applications.The screws are listed on this instruction sheet:   click here
The 450 replaced the 360. Door preps are different. 
A special template may be needed.  The door thickness changes the geometry between the pivot point of the hinge and the pivot points at either end of the arm.Contact support at 877-671-7011, o...
This type of door is larger than this hold open was destined for.  Engineering may be able to make something larger, but right now we offer nothing.
Yes, it was changed to Ives, now called the Ives CL11 and CL12.  The CL12 still has "BB" stamped into it, and the CL11 has "AA" still stamped into it, carry overs from when they were GJ. ...
September 2001
Yes, but it has to be special ordered so that a hole can be prepared into the coordinator for the latches.  
No, the door and frame preparation are different, and the arms and tracks are different on the standard versus ADJ products.  A new unit must be ordered if you want to change the function to o...
The Steelcraft Paladin Series doors and frames are available in compliance with FEMA 361 and ANSI ICC500-2014.  The door system may include other approved Allegion hardware and components that...
Yes, the Glynn Johnson 100 S and 100 SE holder/stops are templated the same.