What power supply do I use with an L9000 electrified L lock?

Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU
These models require 12 VDC with a peak current or 1.0 amps or 24 VDC with a peak current of 0.4 amps.  The following power supplies can be used for the given amount of electrified L locks.
  • PS902, max 2 Amps - 1-2 locks at 12 VDC, 4 locks at 24 VDC
  • PS904, max 4 Amps - 3-4 locks at 12 VDC , 9 locks at 24 VDC
  • PS906, max 6 Amps - 5-6 locks at 12 VDC, 14 locks at 24 VDC


Applies to L9080EL/EU, L9082EL/EU (Discontinued)
 

The Schlage L9080 EU/EL and L9082 EU/EL require 24 VAC/VDC with a peak current of 1.3 Amps at 5 to 10 second intervals and a holding current of 0.135 Amps between peak current intervals. The following power supplies can be used for the given amount of electrified L locks.

  • PS902, max 2 Amps - 1 L9080/82 EU/EL
  • PS904, max 4 Amps - 2 L9080/82 EU/EL
  • PS906, max 6 Amps - 4 L9080/82 EU/EL



DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask